Zelda, Kingdom Hearts and Mario models by Kevin

(click for a bigger picture)

29-10-2014: Kevin built quite a few papercraft models before, but he’s extra proud of his new one: the “King of Red Lions”, from “The Legend of Zelda: The Wind Waker”!

It’s a very challenging model to build, but Kevin spent a lot of time on it, and he even made the special “sea base” and the customized “Chokipeta Link” that Josh Darrah made (link).

And as you can see, the end result looks great! ;o)
picture 2 | picture 3 | picture 4

05-10-2014: Kevin already built quite a few papercraft models, and here are some new ones!

The first one is adult Link, from The Legend of Zelda: Ocarina of Time: picture

But actually, he built two versions of Ocarina of Time’s adult Link, the other one is the one riding Epona: picture

The next one is from another Legend of Zelda game, namely Twilight Princess, and it’s Link in the Zora armor: picture!

The other two papercraft models are from the Kingdom Hearts series, and they are the main character Sora and his Keyblade and a character featured from the Final Fantasy series, Cloud Strife:

picture | picture | picture

Building so many papercraft models shows that Kevin really likes papercraft, and with the experience he gained, he’s thinking about tackling more complex papercraft models too! ;o)

05-04-2014: Kevin sent me bunch of new pictures of the new papercraft models he built since last time! One of them is another Legend of Zelda model, Fierce Deity Link: picture

But this time he also made some Mario models: in this picture, you can see the Paper Mario 3D that I made, but Kevin also built Paperlegend’s Mario 64 (picture) and PaperJuke’s Luigi (picture)!

And because paper models don’t really care who made them of course, PaperJuke’s Luigi and my Paper Mario are getting along quite well: picture ! ;o)

31-01-2014: Kevin is a big time fan of the Legend of Zelda series, and since he liked Twilight Princess, he decided to build my papercraft Twilight Link, and he did a great job too: picture ! ;o)

Where my own paper Twilight Link has his Master Sword and Hylian Shield in his hands, Kevin made it so they are on his back, and it really looks very good: picture 2

Here are two more pictures from the sides: picture 3 | picture 4

Thank you for building these Ninjatoes’ (andother people’s ;o) papercraft models!

Advertisements

Final Fantasy Auron by Corey

18-02-2014: Corey sent me this picture of my papercraft Final Fantasy X Auron that he built! ;o)

Corey calls it an “attempt” at my Auron, but if that’s the case, I think it’s very good attempt, because he looks great! ;o)

Thank you for building a Ninjatoes’ papercraft model!

One Piece “Going Merry” & Zelda “King of Red Lions” by thithou

12-12-2013: thithou made this papercraft “Going Merry” that you see in this nice little photo collage as a Christmas present for his cousin, and he did a very good job, so that will be a very nice surprise I think! ;o)

He found it a little bit difficult to work with all the small parts, but even so it only took him about 4 days to finish! ;o)

He even changed the horns on the figurehead to a brown colour, and instead of printing the shrouds coming from the mast on a transparant sheet, he decided to make them a little wider so he could make them from paper too.

Before the “Going Merry”, thithou already made several other paper models, including the “King of Red Lions” from the Legend of Zelda series:
picture

And although he didn’t really have any trouble building it, after a while, the figurehead and the mast and sail proved to be a bit too heavy and they started to fall off… :o(

thithou was able to glue on the figurehead again using some extra strong glue this time, but for the mast, he made the difficult decision to carefully remove it completely and rebuild it by printing new parts again.

This way, he could put in some barbecue sticks on the inside for extra strength, and as you can see, it worked really well! ;o)

If you want to see some of the other papercraft models that thithou built, you can have a look at his DeviantArt gallery: link

Thank you for building these Ninjatoes’ papercraft models!

Final Fantasy Yuffie by Shaun

14-12-2013: Yuffie is the newest Final Fantasy character I made so far, and as you can see, Shaun liked her so much that he decided to build her too! ;o)

I think most parts aren’t too difficult, and Shaun found the parts layout and the instructions very helpful, and he did a very good job:
picture 2 | picture 3 | picture 4

If you want to see bigger versions of these pictures, you can do so on the Imgur gallery that Shaun created: link

Thank you for building a Ninjatoes’ papercraft model!

Auron by Patricius

02-06-2013: The papercraft cool guy in the picture above is of course Auron, from Final Fantasy X!

He was built by Patricius Jason, who did a great job I must say! ;o)

And if you look closely, you can just make out a papercraft Blaziken Pokémon on Auron’s right too, from the PaperPokés website!

Patricius did a great job on that one too, and if you want to see for yourself you can visit Patricius’ DeviantArt gallery here or have a look at his Twitter gallery here!

Thank you for building a Ninjatoes’ papercraft model!

Link, Sora and Yuna by cdncarlie

18-05-2013: This Ocarina of Time adult Link was the first papercraft model where cdncarlie coloured all the white edges of the paper to get rid of the “white lines” on the final paper model.

Despite the extra time it took, she really likes the result and I think you’ll have to agree that it looks really good! ;o)

Ocarina of Time Link wasn’t the first papercraft model cdncarlie built though: two other paper models of mine that she built are Kingdom Hearts’ Sora and Final Fantasy X-2’s Yunapicture | picture

Yuna is actually an old model already, from March 2009, and at the time, it was the most difficult model cdncarlie did so far!

She gave Yuna away as a gift, but she feels that with all the papercrafting experience she has now (in her DeviantArt gallery, you can see lots more papercraft models she built: link !) she could do an even better job now! ;o)

cdncarlie is a bit of a perfectionist, so she would also like to fix Sora’s Kingdom Key keyblade (it looks a bit crooked) but the problem is that she already gave that one away as a gift too…! ;o)

Thank you for building these Ninjatoes’ papercraft models!